CKB:Configuring time zone and NTP: Unterschied zwischen den Versionen
Aus Cryptshare Documentation
(Imported from text file) |
Keine Bearbeitungszusammenfassung |
||
| Zeile 10: | Zeile 10: | ||
== Solution: == | == Solution: == | ||
It is possible to change the time zone and NTP settings on the pre-configured appliance. | It is possible to change the time zone and NTP settings on the pre-configured appliance. | ||
1. login as 'root' on the appliance | |||
2. run the command 'yast2' | |||
3. go to System --> Date and Time | |||
4. select 'Run' | |||
[[File:8684689.png]] | [[File:8684689.png]] | ||
5. select the needed Region and Country, e.g. Europe --> Germany | 5. select the needed Region and Country, e.g. Europe --> Germany | ||
[[File:8684690.png]] | [[File:8684690.png]] | ||
6. select 'Other Settings...' | 6. select 'Other Settings...' | ||
7. change the time manually (option 1) | |||
or | 7. change the time manually (option 1) | ||
or | |||
activate 'Synchronize with NTP Server' (option 2) | activate 'Synchronize with NTP Server' (option 2) | ||
[[File:8684688.png]] | [[File:8684688.png]] | ||
8. select 'Accept' | 8. select 'Accept' | ||
9. select 'OK' | 9. select 'OK' | ||
10. select 'Quit' | 10. select 'Quit' | ||
11. restart the Cryptshare service using the commands: | 11. restart the Cryptshare service using the commands: | ||
rccryptshare stop | rccryptshare stop | ||
Aktuelle Version vom 14. Januar 2022, 14:42 Uhr
Applies to:
All versions of Cryptshare Appliance
Purpose:
The default time, time zone and NTP settings do not match your preferences or need to be changed for other reasons.
Solution:
It is possible to change the time zone and NTP settings on the pre-configured appliance.
1. login as 'root' on the appliance
2. run the command 'yast2'
3. go to System --> Date and Time
4. select 'Run'
5. select the needed Region and Country, e.g. Europe --> Germany
6. select 'Other Settings...'
7. change the time manually (option 1)
or
activate 'Synchronize with NTP Server' (option 2)
8. select 'Accept'
9. select 'OK'
10. select 'Quit'
11. restart the Cryptshare service using the commands:
rccryptshare stop rccryptshare start
