Quelltext der Seite CKB:Configuring Logical Volume Manager (LVM)

  

== Applies to: ==
{{NoteBox|title=|content=All versions of Cryptshare Virtual Appliance
}}

== Purpose: ==
This is an example on configuring LVM on Cryptshare Appliances

== Solution: ==
# log in as '''root''' on your appliance
# run the command '''yast  
'''
# navigate to '''System → Partitioner''' and press '''Enter'''
[[File:74384686.png]]
# press '''Enter''' to agree the Warning  
[[File:74384688.png]]
# navigate to virtual disk which will be used for LVM
[[File:74384692.png]]
# add new partition as '''Raw Volume (unformatted)'''  
[[File:74384695.png]][[File:74384696.png]]
# do not format device and select '''Linux LVM''' as Partition ID  
[[File:74384698.png]]
# repeat steps 5, 6 and 7 for all disks which will be used for LVM
# navigate to '''Volume Management''' and create new Volume Group  
[[File:74384699.png]]  
enter the volume name, select and add previously configured disks  
[[File:74384700.png]][[File:74384701.png]]
# create new Logical Volume on the volume group  
[[File:74384702.png]][[File:74384703.png]][[File:74384704.png]][[File:74384705.png]]  
format the volume e.g. as EXT4 and add a mount point you prefer, e.g. /var/opt/data  
[[File:74384706.png]][[File:74384707.png]][[File:74384708.png]][[File:74384709.png]]
# new volume will be mounted now  
[[File:74384710.png]]
# create needed folders on the new volume, e.g. uploads, backup and tmp and apply needed permissions
 '''mount'''
 
 cryptshare:~ # mkdir /var/opt/data/uploads
 cryptshare:~ # mkdir /var/opt/data/backup
 cryptshare:~ # mkdir /var/opt/data/tmp
 cryptshare:~ # chown -R csuser:csgroup /var/opt/data
# configure corresponding entries on Cryptshare Administration Interface  
[[File:74384711.png]][[File:74384712.png]]  
  
for configuring temp folder [https://wiki.cryptshare.com/display/CSM/System+Startup+Configuration visit this page]